Remodeling is about getting rid of the old and replacing it with new, and it does require a minimum of tools to get the work done. Each project may have its own specific requirements. For those looking through their tool chest and wondering if they have what is necessary, just a few basic tools are required for almost any project of this type. An assortment of screwdrivers, a wrench, the popular sledgehammer and a claw hammer, and a few handy cutting tools should handle most of the work. There will also be a host of tools to clean up the area after demolition begins, and it could be helpful to be prepared for the final stage of assembly or installation.
It would seem there should be a wide variety of tools necessary to take out walls, cabinets, flooring and fixtures, but this part of the work will be relatively simple. The tools needed often consist of various screwdrivers to disassemble cabinet doors, and walls often come down easily with a small sledgehammer. When demolition begins on the floors, it is often important to be able to cut carpeting and the underlying matting into sections. A good razor knife is often the easiest tool to get that job done.
Power tools do have their place in demolition, and a reciprocating saw can be the most useful tool available. It can provide the perfect cut when taking out a stud that needs replacement, or it can be used to sever unneeded plumbing lines when sinks and bathtubs are being replaced. Many are easy to use, cost very little, and they usually require only an extension cord to the nearest outlet to be ready to get the job done.
Preparing to Rebuild
After the demolition has been completed, it only makes sense to clean up the area before proceeding. A broom and dustpan are the basic tools most people will need to use, but owning or even renting a shop-vac could make the job quicker and easier on the workers. The power of a good shop vacuum cleaner is one reason to use it, but there is also the matter of wet materials. If a water line has been breached, being able to immediately suck up the water before it can cause damage is a plus during kitchen and bathroom renovations.
Flooring and Walls
There are many times when just painting the floors or replacing the old carpets is not enough, so flooring and walls may need to be replaced. Taking them out is detailed in the demolition section, but there are a few tools that could come in handy for some of the basic work. A sturdy pair of pliers is often useful when getting out the staples used to keep the matting under the carpet in place. A small crowbar can help with this operation, and it can also be useful in removing unneeded nails in the studs or remaining walls. While a claw hammer will function in the same way, the ability to have two tools to do the same jobs can be a bonus if there are additional workers in need of work.
Time to Rebuild
Taking a room back to the studs and bare floors is an awesome accomplishment, but finishing the job will make it worthwhile. The walls might be in need of new drywall, but using a drywall saw is often a long and frustrating experience. The same razor cutting tool used to slice carpeting down to size for removal can be useful in this case. Scoring the drywall after measuring and popping it to get rid of the excess is a fast and easy way to get it ready for installation. A hammer and nails can be useful to get it on the walls, or a powered nail gun or even an electric screwdriver can be used to make the job go faster.
Flooring comes in many materials and sizes, so the choice of tools to use can vary greatly. For those rebuilding their flooring with engineered woods, a handsaw or a power saw will do the work. It should be noted that the time to rebuild the room will often be less when power tools are used, but hand tools can be just as effective for those with the right experience.
The majority of renovations take place in the kitchen or bathroom of the home, and there are often cabinets and sinks that will need installation. Tiling is often one of the more important finishing touches, and that will require its own tool. For those who only have a table saw, equipment rental might be their best option at this time.
Cabinets generally require some assembly before they are ready for installation, and it might be best to grab a screwdriver and a drill to get the work completed. The draws and cabinet doors will need handles installed, and the doors will have to be attached to the cabinets. It can be a bit time-consuming and frustrating, but these two tools are all that are really needed.
Tiling on the walls and flooring can be an interesting job for those who have tackled it before, but knowing how to do it is just the start. The one tool often needed to cut modern ceramic tiling to the right size is a specialty power saw that most people will not have. Cutting ceramics and glass requires keeping the item cool, and water is used for that reason, Few people own a saw that works with water, so rental is often a necessary evil if a tiled back splash or ceramic flooring are part of the finishes chosen. This saw is easy to use once it is set up, and a good hose for a consistent water supply is all that is needed once the power supply has been safely secured.
Taking on a remodeling job can be easy or difficult, but having the right tools for each job can make it a success. While the majority of tools necessary can be found in many home tool chests, knowing what specialty items will make the job easier before starting can be a bonus for those working on a project. Tool rentals have become a good way to help home remodelers get the work done, and they should be a useful tool when it is time to start.